VEVOR Gate Remote Control 4-Button Backup Key Accept Signal Within 100ft for Automatic Opener Hardware Sliding Driveway Security Kit | VEVOR US (2024)

FAQs

Why is my remote not working on my gate motor? ›

Dead battery or defective remote

If your remote isn't working, the first thing you should do is to try to open the gate using another device such as a keypad, intercom, or backup remote control. If these don't work, the remote's batteries may have lost their charge.

This signal can be sent by WiFi, Bluetooth, or radio waves. Remote control gate openers include two devices: The receiver. This is the device that receives a wireless signal from the remote and instructs the gate-opening motor to open the gate.

A universal remote is an excellent investment, whether you've lost your gate operator's original remote or want an upgrade to control multiple devices from a single unit. Universal gate remotes can be programmed to work with various gate operators.

There could simply be a fault with the transmitter you use to open and close your electric gates. Changing the battery will often fix the problem. Transmitter batteries will last for a long time but, like all batteries, they will eventually die.

If your gate simply isn't working, it could be due to an electrical outage. Check that the gate is still receiving power. If it is, your remote control may simply need new batteries. If that's not the issue, manually check the door to see if it slides or swings freely or if there's something preventing it from moving.

The first way to increase the radio range of your remote control is to install an aerial. This must necessarily have the same frequency as the automatic gate's remote control. Therefore, if for example the remote control is 433 MHz, the antenna must be 433 MHz.

Remote control range for automatic gate motors is typically around 20m from inside a car, although this range may be reduced by metal fencing or other obstructions.

In fact, the vast majority of gate remotes can be copied relatively easily. There are two steps, normally, to getting a new gate remote, which we will guide you through.

Most popular brands of gate motors have either a manual release lever, handle or key. You need to locate and use this to disengage/unlock the motor. If the motor has a manual release key, insert the key into the lock and turn it.

All you need to do is contact us. We have expert locksmiths who can reprogram, replace or do whatever is required to get your system working again. Once on-site our experienced and talented team can resolve issues with any lock, key or security device you may have around your property.

Can I control my gate from my phone? ›

a unique app for Android and iOS. With the MyNice Welcome app for Android and iOS, you can control your gate and garage door from your smartphone or smartwatch! You can schedule certain actions to take place at given times and days, for example: "From Monday to Friday, open the gate and garage door at 19.00".

Yes. There are multiple ways to open an electric gate with your phone. You can open a gate from your phone via telephone entry systems, IP intercoms, or gate access control systems. In all three methods, you'll have to install a cell phone gate opener at the gated entrance.

If you replace the batteries and your garage door won't respond to the remote signal, the remote and door sensor signal might be interrupted by an obstruction. Other causes of a disrupted signal might be clicking the remote while out of range or having a broken antenna.

However, the most common reasons for a TV remote that is not working are battery issues, paring issues, or infrared sensor issues. Press the power button while pointing the remote control at your TV. Make sure the LED indicator on the TV blinks. If not, your remote does not have enough power remaining in the batteries.

Adding a remote to the DTS 500 gate motor

Push the required button on the transmitter at arms length from PCB once, the RX led will flash. Press the same button again, the RX, Close & Open led will flash 3 times for a full Keeloq transmitter or twice for other transmitters.