Spectrum Netremote: User Guide for Spectrum Remote Control (2024)

The Spectrum Netremote is a versatile remote control that can be programmed to work with a variety of devices, including TVs, cable boxes, and audio equipment. To get started, users need to install two AA batteries and pair the remote with their Charter WorldBox or other cable box. The user guide provides step-by-step instructions for programming the remote for any device, including popular TV brands. The guide also includes troubleshooting tips for common issues, such as unresponsive equipment or difficulty pairing the remote. Additionally, the guide features a comprehensive key chart that outlines the function of each button on the remote. Users can refer to this chart to find the right button for their desired action. Finally, the guide includes a Declaration of Conformity that outlines the FCC regulations for this device. Overall, the Spectrum Netremote User Guide is an essential resource for anyone looking to get the most out of their Spectrum remote control.

Spectrum Remote Control User Guide

Spectrum Remote Control

Getting Started: Install Batteries

1. Apply pressure with your thumb and slide the battery door for removal. Show image of bottom of remote, indicating pressure point and slide direction
2. Insert 2 AA batteries. Match the + and – marks. Show illustration of batteries in place
3. Slide the battery door back into place. Show bottom of remote with battery door in place, include arrow for slide direction.

Other top spectrum manuals:

• Spectrum Remote Control User Guide
• Spectrum SR-002-R Remote Control User Guide
• Spectrum B08MQWF7G1 Wi-Fi Pods User Guide

Setup Your Remote for a Charter WorldBox

If you have a Charter WorldBox, the remote must be paired with the box. If you do NOT have a WorldBox, proceed to PROGRAMMING YOUR REMOTE FOR ANY OTHER CABLE BOX.

To Pair the Remote to the WorldBox

1. Ensure that your TV and WorldBox are both powered-on and that you can view the video feed from the WorldBox on your TV.
   Show image of STB and TV connected and on
2. To pair the remote, simply point the remote at the WorldBox and press the OK key. The Input key will begin blinking repeatedly.
   Show image of remote pointed at the TV, transmitting data
3. A confirmation message should appear on the TV screen. Follow the on screen instructions to program the remote control for your TV and/or audio equipment as needed.

To Un-Pair the Remote to the WorldBox

If you wish to use the remote with a different cable box, follow these steps to un-pair it with your WorldBox.

1. Press and hold MENU and Nav Down keys simultaneously until the INPUT key blinks twice. Show remote with MENU and Nav Down keys highlighted
2. Press 9-8-7 digit keys. The INPUT key will blink four times to confirm pairing has been disabled. Show remote digits with 9-8-7 highlighted in order.

Programming Your Remote for Any Other Cable Box

This section is for any cable box that is NOT a Charter WorldBox. If you have a WorldBox, refer to the section above for remote pairing, following the on-screen instructions for any other remote programming.

Setup Remote to Control Cable Box

Point your remote at your cable box and press MENU to test. If the cable box responds, skip this step and proceed to PROGAMMING YOUR REMOTE FOR TV AND AUDIO CONTROL.

1. If your cable box is branded Motorola, Arris, or Pace:
   • Press and hold MENU and the 2 digit key simultaneously until the INPUT key blinks twice.
     Show remote with MENU and 3 keys highlighted
2. If your cable box is branded Cisco, Scientific Atlanta, or Samsung:
   • Press and hold MENU and the 3 digit key simultaneously until the INPUT key blinks twice.
     Show remote with MENU and 3 keys highlighted

Programming Your Remote for TV and Audio Control

Setup for Popular TV Brands:
This step covers setup for the most common TV brands. If your brand is not listed, please proceed to SETUP USING DIRECT CODE ENTRY

1. Ensure that your TV is powered-on.
   Show TV with remote pointed at it.
2. Simultaneously press and hold MENU and OK keys on remote until the INPUT key blinks twice.
   Show remote with MENU and OK keys highlighted
3. Find your TV brand in the chart below and note the digit that relates to your TV brand. Press and hold down the digit key.
   

   Digit	TV Brand
   1	Insignia/Dynex
   2	LG/Zenith
   3	Panasonic
   4	Philips/Magnavox
   5	RCA/TCL
   6	Samsung
   7	Sharp
   8	Sony
   9	Toshiba
   10	Vizio

4. Release the digit key when the TV turns off. Setup is complete.
   Show remote pointed at TV, transmitting data and TV is off

NOTES: While holding the digit key, the remote will test for the working IR code, causing the INPUT key to flash each time it tests a new code.

Setup Using Direct Code Entry

This step covers setup for all TV and Audio brands. For faster setup, be sure to locate your device brand in the code list before beginning setup.

1. Ensure that your TV and/or audio device is powered-on.
   Show TV with remote pointed at it.
2. Simultaneously press and hold MENU and OK keys on remote until the INPUT key blinks twice.
   Show remote with MENU and OK keys highlighted
3. Enter the 1st code listed for your brand. The INPUT KEY will blink twice to confirm once complete.
   Show remote with digit keys highlighted
4. Test volume functions. If the device responds as expected, setup is complete. If not, repeat this process using the next code listed for your brand.
   Show remote controlling TV.

Assigning Volume Controls

The remote is set to default to control TV volume once the remote is programmed for a TV. If the remote is also set up to control an audio device, then volume controls will default to that audio device.
If you wish to change volume control settings from these defaults, perform the following steps:

1. Simultaneously press and hold MENU and OK keys on remote until the INPUT key blinks twice.
   Show remote with MENU and OK keys highlighted
2. Press the key below for the device that you wish to use for volume controls:
   • TV Icon = To lock volume controls to the TV, Press VOL +
   • Audio Icon = To lock volume controls to the audio device, Press
   • VOLCable Box Icon = To lock volume controls to the cable box, Press MUTE.

Troubleshooting

Remote Key Chart

Show image of the whole remote control with lines pointing to each key or key group for the description below.

Declaration of Conformity

Federal Communication Commission Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by the turning of equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for help.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

The user is cautioned t that the changes and modification made to the equipment without the approval of manufacturer could void the user’s authority to operate this equipment.

SPECIFICATION

FAQs

VIDEO