LED lights are everywhere now, and you might be surprised to find out how many people don’t know how to reset them. This guide will help you differentiate the various kinds of led lights on the market, as well as teach you where they can go wrong. From burnt-out bulbs to flickering, this guide has all the information that anyone would need for fixing or diagnosing any issue with their LED light.
Table of Contents
What is LED light?
LED is an acronym for light-emitting diode. LED lights are a specific type of lighting that uses semiconductor materials to create light. They are often used in flashlights, headlamps, televisions and other devices because they require very little power to operate and emit very little heat.
What types of lights are there?
There are many types of lights, and each one uses a slightly different technology. The most common kinds include:
Incandescent
This type of lighting is the traditional light bulb that was used in homes for decades. It works by sending electrical current through a filament to create heat and light. These bulbs were phased out due to their high power consumption and short lifespan (usually around 1000 hours). They also emit 90% more heat than other kinds of lights.
Halogen Bulbs
Like incandescent lights, halogens work by heating up an element until it glows with visible light but they use quartz instead of glass so that it can withstand higher temperatures without breaking or cracking. Their life expectancy is similar to standard incandescent lights (1000 hours) but they produce much more heat. Halogens are usually used in work lamps or high-intensity light applications because of their high brightness and power consumption is lower than incandescent bulbs.
Fluorescent
This type of lighting uses a gas inside the tube to create visible light when electricity passes through it. The most common type, CFLs use mercury vapor as well as phosphor material contained within a glass bulb to make them glow with visible white light. These lights have been found to cause problems if not disposed of properly so many countries now require special recycling facilities for this kind of waste disposal process .
Light emitting diode
LEDs from the early days these kinds were typically only red or green and were used as indicator lights on electronic devices. They have come a long way since then and are now available in every color of the rainbow, including white. LEDs use much less power than other types of lights and can last 50,000 to 100,000 hours before needing to be replaced.
How do LED Lights work?
LEDs work by passing electricity through a semiconductor material. This creates light that is often monochromatic (one color), but newer LEDs can create different colors by adding different chemicals to the semiconductor material. The most common type of LED uses gallium nitride (GaN) as the semiconductor material because it emits bright light and doesn’t require a lot of power to run.
What types of LED lighting are there?
There are many types of LED lighting, but they can be broken down into three main categories:
Standard (or classic)
As the name implies these lights use a traditional GaN semiconductor material to create single-color light. These kinds of LEDs require very little power and produce almost no heat so they are ideal for backlighting on video game controllers or TV remotes where you don’t want any extra bulk added to your device. They also make great indicator lights because their brightness is proportional to how much voltage is applied through them.
RGB
This kind uses Red, Green and Blue as its basic colors, meaning that it’s capable of producing white light when all three colors shine at full strength together. You’ll find RGB LEDs in just about every device that has a screen because they are great for backlighting.
Full-Spectrum or White
As the name suggests, these LEDs emit light in all colors of the visible spectrum. This makes them perfect for use in general lighting applications where you want to have a warm, natural light instead of the harsh blueish tint that most LED lights give off.
Causes for Resetting LED Lights
There can be many reasons why you need to reset LED lights:
- You have just replaced an older light with a new one and you want it on the same setting as your old bulb.
- The power has gone out for some reason, so you’re going through your house turning them all back on again.
- Your circuit breaker tripped because too many things were being used at once or some other problem in your home caused a surge of electricity that overloaded the system causing some bulbs to turn off while others remained lit, thus leaving certain spots dark while some remain brightly lit.
What are some of the benefits of LED Lights?
LED lights offer many advantages over other types of lighting. Some of these benefits include:
Low power consumption
LEDs consume far less electricity than other types of lights. This is because they create light by passing current through a semiconductor material, which doesn’t use as much energy as heating up a filament or gas like in incandescent and fluorescent bulbs.
Long lifespan
LEDs typically last 50,000 to 100,000 hours before needing to be replaced, whereas other types of bulbs usually only last 1000-2000 hours.
Instant on/off
Unlike CFLs and halogens, LED lights turn on and off instantly without any delay.
Dimmable
Many LED lights are dimmable, so they can be adjusted to suit different lighting needs.
Low heat
LEDs emit far less heat than other types of light bulbs which makes them more efficient and safer for use around flammable materials.
How do you reset LED lights?
To reset an LED light is the same as any other type of bulb or device that uses electricity: disconnect it from its power source then turn on again after a minute or two. However, if this doesn’t work there may be deeper issues with how to reset your LED lights .
Here are some things you might want to try before buying new ones:
- Try turning off all devices connected to the circuit breaker used by the faulty light switch; sometimes too many appliances plugged into one circuit can cause the breaker to trip.
- Try replacing your LED lights with another type of light bulb and see if that works – sometimes a different kind of bulb is better suited for a particular fixture or lighting need.
If you’re still having problems resetting your LED lights, try contacting customer support from where you bought them or contact an electrical professional who may be able to help solve the problem quickly and effectively so as not to cost more money than trying out these methods in the first place!
Useful Tips
- If you have replaced an older bulb with a new LED and want it on the same setting, consult your light’s manual for instructions on how to do this.
- If resetting your LED lights still doesn’t work, try replacing them with another type of light bulb to see if that fixes the problem.
- Before trying anything else, turn off all devices connected to the breaker used by the faulty light switch as too many appliances plugged into one circuit can cause the breaker to trip.
- Contact customer support from where you bought your LED lights or an electrical professional who may be able to help solve the problem quickly and effectively.
How to Reset LED Light Remote?
The process of resetting LED light remotes is very similar to that of resetting LED lights themselves. First, disconnect the remote from its power source then turn it back on after a minute or two. If this doesn’t work, try replacing the batteries in the remote or consult your device’s manual for other troubleshooting tips.
Just as with LED lights, if you’re still having problems resetting your LED light remote contact customer support from where you bought it or an electrical professional who may be able to help solve the problem quickly and effectively.
How Often Should You Reset Your LED Lights?
There is no set answer as to how often you should reset your LED lights as different people and households will have different needs and uses for them. Generally, resetting LED lights once a year is sufficient for most people and devices, but some may need to be reset more often depending on their usage.
Conclusion
LED lights are a great alternative to other types of light bulbs and offer many benefits such as longer lifespan, low heat emissions, and instant on/off. However, if you’re having problems resetting your LED lights there may be deeper issues that need to be addressed. Before trying anything else, try some of the methods outlined in this article or contact customer support from where you bought them for more help.
