LED lights are everywhere now, and you might be surprised to find out how many people don’t know how to reset them. This guide will help you differentiate the various kinds of led lights on the market, as well as teach you where they can go wrong. From burnt-out bulbs to flickering, this guide has all the information that anyone would need for fixing or diagnosing any issue with their LED light.
Table of Contents
What is LED light?
LED is an acronym for light-emitting diode. LED lights are a specific type of lighting that uses semiconductor materials to create light. They are often used in flashlights, headlamps, televisions and other devices because they require very little power to operate and emit very little heat.
What types of lights are there?
There are many types of lights, and each one uses a slightly different technology. The most common kinds include:
This type of lighting is the traditional light bulb that was used in homes for decades. It works by sending electrical current through a filament to create heat and light. These bulbs were phased out due to their high power consumption and short lifespan (usually around 1000 hours). They also emit 90% more heat than other kinds of lights.
Like incandescent lights, halogens work by heating up an element until it glows with visible light but they use quartz instead of glass so that it can withstand higher temperatures without breaking or cracking. Their life expectancy is similar to standard incandescent lights (1000 hours) but they produce much more heat. Halogens are usually used in work lamps or high-intensity light applications because of their high brightness and power consumption is lower than incandescent bulbs.
This type of lighting uses a gas inside the tube to create visible light when electricity passes through it. The most common type, CFLs use mercury vapor as well as phosphor material contained within a glass bulb to make them glow with visible white light. These lights have been found to cause problems if not disposed of properly so many countries now require special recycling facilities for this kind of waste disposal process .
Light emitting diode
LEDs from the early days these kinds were typically only red or green and were used as indicator lights on electronic devices. They have come a long way since then and are now available in every color of the rainbow, including white. LEDs use much less power than other types of lights and can last 50,000 to 100,000 hours before needing to be replaced.
How do LED Lights work?
LEDs work by passing electricity through a semiconductor material. This creates light that is often monochromatic (one color), but newer LEDs can create different colors by adding different chemicals to the semiconductor material. The most common type of LED uses gallium nitride (GaN) as the semiconductor material because it emits bright light and doesn’t require a lot of power to run.
What types of LED lighting are there?
There are many types of LED lighting, but they can be broken down into three main categories:
Standard (or classic)
As the name implies these lights use a traditional GaN semiconductor material to create single-color light. These kinds of LEDs require very little power and produce almost no heat so they are ideal for backlighting on video game controllers or TV remotes where you don’t want any extra bulk added to your device. They also make great indicator lights because their brightness is proportional to how much voltage is applied through them.
This kind uses Red, Green and Blue as its basic colors, meaning that it’s capable of producing white light when all three colors shine at full strength together. You’ll find RGB LEDs in just about every device that has a screen because they are great for backlighting.
Full-Spectrum or White
As the name suggests, these LEDs emit light in all colors of the visible spectrum. This makes them perfect for use in general lighting applications where you want to have a warm, natural light instead of the harsh blueish tint that most LED lights give off.
Causes for Resetting LED Lights
There can be many reasons why you need to reset LED lights:
- You have just replaced an older light with a new one and you want it on the same setting as your old bulb.
- The power has gone out for some reason, so you’re going through your house turning them all back on again.
- Your circuit breaker tripped because too many things were being used at once or some other problem in your home caused a surge of electricity that overloaded the system causing some bulbs to turn off while others remained lit, thus leaving certain spots dark while some remain brightly lit.
What are some of the benefits of LED Lights?
LED lights offer many advantages over other types of lighting. Some of these benefits include:
Low power consumption
LEDs consume far less electricity than other types of lights. This is because they create light by passing current through a semiconductor material, which doesn’t use as much energy as heating up a filament or gas like in incandescent and fluorescent bulbs.
LEDs typically last 50,000 to 100,000 hours before needing to be replaced, whereas other types of bulbs usually only last 1000-2000 hours.
Unlike CFLs and halogens, LED lights turn on and off instantly without any delay.
Many LED lights are dimmable, so they can be adjusted to suit different lighting needs.
LEDs emit far less heat than other types of light bulbs which makes them more efficient and safer for use around flammable materials.
How do you reset LED lights?
To reset an LED light is the same as any other type of bulb or device that uses electricity: disconnect it from its power source then turn on again after a minute or two. However, if this doesn’t work there may be deeper issues with how to reset your LED lights .
Here are some things you might want to try before buying new ones:
- Try turning off all devices connected to the circuit breaker used by the faulty light switch; sometimes too many appliances plugged into one circuit can cause the breaker to trip.
- Try replacing your LED lights with another type of light bulb and see if that works – sometimes a different kind of bulb is better suited for a particular fixture or lighting need.
If you’re still having problems resetting your LED lights, try contacting customer support from where you bought them or contact an electrical professional who may be able to help solve the problem quickly and effectively so as not to cost more money than trying out these methods in the first place!
- If you have replaced an older bulb with a new LED and want it on the same setting, consult your light’s manual for instructions on how to do this.
- If resetting your LED lights still doesn’t work, try replacing them with another type of light bulb to see if that fixes the problem.
- Before trying anything else, turn off all devices connected to the breaker used by the faulty light switch as too many appliances plugged into one circuit can cause the breaker to trip.
- Contact customer support from where you bought your LED lights or an electrical professional who may be able to help solve the problem quickly and effectively.
How to Reset LED Light Remote?
The process of resetting LED light remotes is very similar to that of resetting LED lights themselves. First, disconnect the remote from its power source then turn it back on after a minute or two. If this doesn’t work, try replacing the batteries in the remote or consult your device’s manual for other troubleshooting tips.
Just as with LED lights, if you’re still having problems resetting your LED light remote contact customer support from where you bought it or an electrical professional who may be able to help solve the problem quickly and effectively.
How Often Should You Reset Your LED Lights?
There is no set answer as to how often you should reset your LED lights as different people and households will have different needs and uses for them. Generally, resetting LED lights once a year is sufficient for most people and devices, but some may need to be reset more often depending on their usage.
LED lights are a great alternative to other types of light bulbs and offer many benefits such as longer lifespan, low heat emissions, and instant on/off. However, if you’re having problems resetting your LED lights there may be deeper issues that need to be addressed. Before trying anything else, try some of the methods outlined in this article or contact customer support from where you bought them for more help.
To begin with, make sure that your LED light is plugged into an outlet. Next, press and hold the button on top of the power cord for at least 10 seconds. After this time has elapsed, release the button and wait approximately one minute for it to turn off automatically before unplugging it from its outlet.How do I reset my LED lights? ›
To begin with, make sure that your LED light is plugged into an outlet. Next, press and hold the button on top of the power cord for at least 10 seconds. After this time has elapsed, release the button and wait approximately one minute for it to turn off automatically before unplugging it from its outlet.Why won't my LED lights respond to the remote? ›
If your remote control suddenly stops working or your lights start blinking, you may need to reset the controller and pair it back to the receiver unit. The controller sometimes un-pairs itself from the receiver due to a loose connection, radio interference from an external source or a low battery in your remote.Where is the reset button on LED strip lights? ›
To reset the light strip, locate the corded controller which is attached to the power supply of the light strip. Insert a paper clip, or a similar sized object, into the reset hole on the controller (depicted below). Using the paper clip, press and hold the reset button inside the reset hole for eight (8) seconds.What is wrong with my LED lights? ›
Reasons often include a faulty power supply, loose connections, a faulty circuit design, or even damage due to water ingress caused by rain. Whatever the reason is for your LED lights not working and whatever the tell-tale signs are, there's usually a solution to the issue.How can I control my LED lights without a remote? ›
Connect LED lights to a phone or tablet
To control your LED lights without a remote, one convenient option is to connect them to your phone or tablet. Many LED light systems such as Roku or Philips Hue have dedicated apps that allow you to wirelessly control the lights through Bluetooth or WiFi.
Yes, you can use as many controllers or different types of controllers as you wish. For example, you could use the remote control and the wall controller in combination, both paired to the same LEDs. Whichever controller you use last decides on your LEDs' setting.Can you reset a smart light? ›
Ensure that the Smart Light you wish to factory reset is turned on and then proceed to turn it Off and On three times rapidly at the switch where it is plugged into the wall. The above will trigger the Resetting process and the Light will begin to flash rapidly.What do I do if my LED lights aren't working? ›
If the LEDs will not light up at all, then this could be down to a faulty power supply. Solution: If you have several power supplies, then try a different power supply onto the same strip to see if this now works. If it does, then you have a faulty power supply and will need a new one.Why won t my LED lights change colors? ›
It's possible that there is a problem with the wiring or circuitry in your LED strip lights. You may want to check the connections and make sure they are secure and not loose. Additionally, it's possible that there is a problem with the controller that is used to change the color of the lights.
Is there a way to turn-on a remote-controlled LED light strip without the remote? Universal LED light remote app: You can download an app that can control LED lights via Bluetooth. These apps provide color changing and scheduling options. Smart switch: You can install a smart switch to control LED lights via an app.How do you fix LED lights when the colors are wrong? ›
Replace Faulty Bulbs to Fix Different LED Light Colors
Check the bulbs individually to identify any that are not functioning properly and replace them with new bulbs. When you're getting new bulbs, however, make sure you're getting compatible bulbs of similar quality that can operate on the same supply power.
It's possible that there is a problem with the wiring or circuitry in your LED strip lights. You may want to check the connections and make sure they are secure and not loose. Additionally, it's possible that there is a problem with the controller that is used to change the color of the lights.Why is only one set of my LED lights working? ›
If your power supply, accessories, and voltage are in good order, the next common culprit is a poor connection. Clearly, if power can't reach every part of your light strip, you will have lights that don't work. The most likely place for a poor connection along an LED strip is at a solderless connector.