Bose Soundbar 300 operation manual (2024)

IMPORTANT SAFETY INSTRUCTIONS

Please read and keep all safety, security,­ and use instructions.

Bose Corporation hereby declares that this product is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU and all other applicable EU directive requirements. The complete declaration of conformity can be found at: www.Bose.com/compliance

Important Safety Instructions

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with a dry cloth.

7.Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ­amplifiers) that produce heat.

9.Only use attachments/accessories specified by the manufacturer.

10. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

11.Unplug this apparatus during lightning storms or when unused for long periods of time.

12.Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the ­apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

WARNINGS/CAUTIONS

This symbol on the product means there is uninsulated, dangerous voltage within the product enclosure that may present a risk of electrical shock.

This symbol on the product means there are important operating and maintenance instructions in this guide.

Do not ingest battery, chemical burn hazard. The remote control supplied with this product contains a coin/ button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the remote control and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention. To avoid risk of explosion, fire or chemical burn, use caution in replacing the battery and replace only with an agency approved (e.g., UL) CR2032 or DL2032 3-volt lithium battery. Properly and promptly dispose of used batteries. Do not recharge, disassemble, heat above 212° F (100° C) or incinerate.

Contains small parts which may be a choking hazard. Not suitable for children under age 3.

This product contains magnetic material. Consult your physician on whether this might affect your implantable medical device.

IMPORTANT SAFETY INSTRUCTIONS

•To reduce the risk of fire or electrical shock, do NOT expose this product to rain, liquids or moisture.

•Do NOT expose this product to dripping or splashing, and do not place objects filled with liquids, such as vases, on or near the product.

•Keep the product away from fire and heat sources. Do NOT place naked flame sources, such as lighted candles, on or near the product.

•Do NOT make unauthorized alterations to this product.

•Do NOT use a power inverter with this product.

•The speaker wire and interconnect cables included with this system are not approved for in-wall installation­. Please check your local building codes for the correct type of wire and cable required for in-wall installation.

•Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable.

2000m

Use at altitude less than 2000 meters only.

•Only use the following hardware to mount this product: Bose Soundbar Wall Bracket

•Do not mount on surfaces that are not sturdy, or that have hazards concealed behind them, such as electrical wiring or plumbing. If you are not sure about installing the bracket, contact a qualified professional installer. Ensure the bracket is installed according to local building codes.

•Due to ventilation requirements, Bose does not recommend placing the product in a confined space such as in a wall cavity or in an enclosed cabinet.

•Do not place or install the bracket or product near any heat sources, such as fireplaces, radiators, heat registers or other apparatus (including amplifiers) that produce heat.

•The product label is located on the back of the soundbar.

REGULATORY INFORMATION

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by Bose Corporation could void the user’s authority to operate this equipment.

This device complies with part 15 of the FCC Rules and with ISED Canada license-exempt RSS standard(s). Operation­

is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment should be installed and operated with a minimum distance of 20 cm between radiator and your body.

This device for operation in the band 5150 – 5250 MHz is only for indoor use to reduce the potential for harmful interference to other co-channel mobile satellite systems.

CAN ICES-3(B)/NMB-3(B)

The product, in accordance with the Ecodesign Requirements for Energy Related Products Directive 2009/125/EC, is in compliance with the following norm(s) or document(s): Regulation (EC) No. 1275/2008, as amended by Regulation (EU) No. 801/2013.

REGULATORY INFORMATION

For Europe:

Frequency bands of operation 2400 to 2483.5 MHz, 5150 to 5350 MHz, and 5470 to 5725 MHz. Maximum transmit power less than 20 dBm EIRP.

Maximum transmit power is below regulatory limits such that SAR testing is not necessary and exempt per applicable regulations.

This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range in all EU Member States listed in the table.

This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Proper disposal and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contact your local municipality, disposal service, or the shop where you bought this product.

Management Regulation for Low-power Radio-frequency Devices

Article XII

According to “Management Regulation for Low-power Radio-frequency Devices” without permission granted by the NCC, any company, enterprise, or user is not allowed to change frequency, enhance transmitting power or alter original characteristic as well as performance to an approved low power radio-frequency devices.

Article XIV

The low power radio-frequency devices shall not influence aircraft security and interfere legal communications; If found, the user shall cease operating immediately until no interference is achieved. The said legal communications means radio communications operated in compliance with the Telecommunications Act.

The low power radio-frequency devices must be susceptible with the interference from legal communications or ISM radio wave radiated devices.

Please dispose of used batteries properly, following local regulations. Do not incinerate.

China Restriction of Hazardous Substances Table

Names and Contents of Toxic or Hazardous Substances or Elements

O:Indicates that this toxic or hazardous substance contained in all of the ­hom*ogeneous materials for this part is below the limit requirement of GB/T 26572.

X:Indicates that this toxic or hazardous substance contained in at least one of the hom*ogeneous materials used for this part is above the limit requirement of GB/T 26572.

REGULATORY INFORMATION

Taiwan Restriction of Hazardous Substances Table

Equipment name: Powered Speaker, Type designation: 432552

Note 1: “○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence.

Note 2: The “−” indicates that the restricted substance corresponds to the exemption.

Date of Manufacture: The eighth digit in the serial number indicates the year of manufacture; “0” is 2010 or 2020.

China Importer: Bose Electronics (Shanghai) Company Limited, Part C, Plant 9, No. 353 North ­Riying Road, China (Shanghai) Pilot Free Trade Zone

EU Importer: Bose Products B.V., Gorslaan 60, 1441 RG Purmerend, The Netherlands

Taiwan Importer: Bose Taiwan Branch, 9F-A1, No. 10, Section 3, Minsheng East Road, Taipei City 104, Taiwan Phone Number: +886-2-2514 7676

Mexico Importer: Bose de México, S. de R.L. de C.V., Paseo de las Palmas 405-204, Lomas de Chapultepec, 11000 México, D.F. Phone Number: +5255 (5202) 3545

Input Rating: 100-240V 1 50/60Hz, 100W

The CMIIT ID is located on the product label on the back of the soundbar.

California: Contains lithium ion battery with Perchlorate Material - special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate

Please complete and retain for your records

The serial and model numbers are located on the back of the soundbar.

Serial number: _____________________________________________________________________

Model number: ____________________________________________________________________

Please keep your receipt with your owner’s guide. Now is a good time to register your Bose product. You can easily do this by going to global.Bose.com/register

LEGAL INFORMATION

Security Information

This product is capable of receiving automatic security updates from Bose. To receive automatic security updates, you must complete the product setup process in the Bose Music app and connect the product to the Internet. If you do not complete the setup process, you will be responsible for installing security updates that Bose makes available.

Amazon, Alexa, Amazon Music, and all related logos are trademarks of Amazon, Inc. or its affiliates.

Apple, the Apple logo, AirPlay, and Apple Music are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.

Use of the Works with Apple badge means that an accessory has been designed to work specifically with the technology­ identified in the badge and has been certified by the developer to meet Apple performance standards.

The Bluetooth® word mark and logos are ­registered ­trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Bose Corporation is under license.

Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories.

Google and Google Play are trademarks of Google LLC.

The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or

registered trademarks of HDMI Licensing Administrator, Inc.

This product contains the iHeartRadio service. iHeartRadio is a registered trademark of iHeartMedia, Inc.

This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft.

Pandora is a trademark or registered trademark of Pandora Media, Inc. used with permission.

This product incorporates Spotify software which is subject to third-party licenses found here: www.spotify.com/connect/third-party-licenses

Spotify is a registered trademark of Spotify AB.

Designed with UEI Technology™. Under License from Universal Electronics, Inc. © UEI 2000-2020 Wi-Fi is a registered trademark of Wi-Fi Alliance®.

Acoustimass, Bose, Bose Bass Module, Bose Music, Bose Noise Cancelling Headphones, Bose Smart Soundbar, Bose Soundbar Wall Bracket, Bose Surround Speakers, SimpleSync, SoundLink, SoundLink Revolve, Virtually Invisible, and Voice4Video are trademarks of Bose Corporation.

Bose Corporation Headquarters: 1-877-230-5639

©2020 Bose Corporation. No part of this work may be reproduced, modified, distributed, or ­otherwise used without prior written permission.

LICENSE DISCLOSURES

To view the license disclosures that apply to the third-party software packages included as components of your Bose Smart Soundbar 300 product:

1.On the remote, press and hold the Play/Pause button F and Volume up button H for 5 seconds.

2.Connect a micro-USB cable to the SERVICE port on the back of the soundbar.

3.Connect the other end of the cable to a computer.

4.On the computer, enter http://203.0.113.1/opensource in a browser window to display the EULA and license disclosure.

WHAT’S IN THE BOX

CONTENTS

Confirm that the following parts are included:

Bose Smart Soundbar 300

* May ship with multiple power cords. Use the power cord for your region.

NOTE: If any part of the product is damaged, don’t use it. Contact your authorized Bose dealer or Bose customer service.

Visit: worldwide.Bose.com/Support/SB300

SOUNDBAR PLACEMENT

RECOMMENDATIONS

•Place the soundbar outside of and away from metal cabinets, other audio/video components, and direct heat sources.

•Place the soundbar directly below (preferred) or above your TV with the grille facing into the room.

•Place the soundbar on its rubber feet on a stable and level surface. For proper support, both feet must be resting on the surface. Vibration can cause the soundbar to move, particularly on smooth surfaces like marble, glass, or highly polished wood.

•If placing the soundbar on a shelf or TV stand, position the front of the soundbar as close as possible to the front edge of the shelf or stand for best sound quality.

•Keep the back side of the soundbar at least 0.4 in (1 cm) from any other surface. Blocking the port(s) on this side affects sound quality.

•Make sure there is an AC (mains) outlet nearby.

•To avoid wireless interference, keep other wireless equipment at least 1 – 3 ft (0.3 – 0.9 m) away from the soundbar.

•For best sound quality, don’t place the soundbar in an enclosed cabinet or diagonally in a corner.

•Don’t place any objects on top of the soundbar.

CAUTION: Do NOT place the soundbar on its front, back, or top when in use.

Soundbar Placement

WALL MOUNT THE SOUNDBAR

You can mount the soundbar on a wall. To purchase the Bose Soundbar Wall Bracket, contact your authorized Bose dealer.

Visit: worldwide.Bose.com/Support/SB300

CAUTION: Do NOT use any other hardware to mount the soundbar.

Adjust audio for wall mounting

After you mount the soundbar, you must adjust audio for best sound quality.

On the remote, press and hold the Mute button A for 5 seconds until you hear a tone and the light bar pulses white twice.

NOTE: If you remove the soundbar from the wall, repeat to return the soundbar to default audio settings.

TIP: You can also adjust audio for wall mounting using the Bose Music app.

POWER

CONNECT THE SOUNDBAR TO POWER

1.Connect the power cord to the POWER port on the back of the soundbar.

2.Plug the other end of the power cord into an AC (mains) outlet.

2

1

The soundbar powers on, and the light bar glows solid amber.

NETWORK STANDBY

The soundbar transitions to network standby when audio has stopped and you have not pressed any buttons for 20 minutes. To wake the soundbar from network standby:

•On the remote, press the Power button I, a source button (see page 20), or the Play/Pause button F (see page 18).

•Play or resume audio using your mobile device or using the Bose Music app.

•Talk to Google Assistant or Amazon Alexa.

NOTES: 

•To access your voice assistant in network standby, make sure the soundbar has been set up using the Bose Music app (see page 16) and the microphone is on

(see page 37).

•You can disable the standby timer using the Bose Music app. You can access this option from the Settings menu.

BOSE MUSIC APP SETUP

The Bose Music app lets you set up and control the soundbar from any mobile ­device, such as a ­smartphone or tablet.

Using the app, you can stream music, set and change presets, add music services, ­explore internet radio stations, configure Google Assistant or Amazon Alexa, choose your voice prompt language, manage soundbar settings, and get new features.

NOTE: If you have already created a Bose Music account for another Bose product, add the soundbar to your existing account (see page 17).

DOWNLOAD THE BOSE MUSIC APP

1. On your mobile device, download the Bose Music app.

BOSE MUSIC

2. Follow the app instructions.

SOUNDBAR CONTROLS

The soundbar controls are located on the top of the soundbar and on the remote.

TIP: You can also control the soundbar using the Bose Music app.

REMOTE FUNCTIONS

Use the remote to control the soundbar, Bluetooth connections, and Bose Music app.

Soundbar Controls

Power on/off

On the remote, press the Power button I to power the soundbar on/off.

When powered on, the soundbar defaults to the last active source.

NOTES: 

•Wheng you plug the soundbar into an AC (mains) outlet, the soundbar automatically powers on.

•The first time the soundbar is powered on, the soundbar defaults to the TV source.

• You can still access your voice assistant when the soundbar is powered off.

TIP: You can also use Voice4Video to power the soundbar on/off (see page 30).

Auto-wake (optical connection only)

You can set the soundbar to power on whenever a sound signal is received.

To toggle between auto-wake and default power settings, on the remote, press and hold I for 5 seconds until you hear a tone and the light bar pulses white twice.

TIP: You can also enable/disable auto-wake using the Bose Music app. You can access this option from the Settings menu.

Soundbar Controls

Sources

You canm control your TV, Bluetooth connections, and Bose Music app using your remote.

To select a source, press the appropriate button (TV O, Bluetooth l, or Bose Music app ) on the remote.

TIPS: 

•You can also use Voice4Video to select your Bluetooth source (see page 30).

•You can also use the Bose Music app to select a source.

Soundbar Controls

Media playback and volume

TIP: You can also use Voice4Video to control media playback and volume for certain sources (see page 30).

Soundbar Controls

PROGRAM A THIRD-PARTY REMOTE

You can program a third-party remote, such as your cable/satellite box remote, to control the soundbar. Refer to your third-party remote owner’s guide or website for instructions.

Once programmed, the third-party remote controls basic soundbar functions such as power on/off and volume.

NOTE: Not all third-party remotes are compatible with the soundbar. The remote must support IR (infrared) signals in order to control the soundbar.

VOICE ASSISTANT

VOICE ASSISTANT OPTIONS

You can set the soundbar to quickly and easily access Google Assistant or Amazon Alexa.

NOTE: 

•You can’t set the soundbar to access Google Assistant and Amazon Alexa at the same time.

•Google Assistant and Amazon Alexa aren’t available in certain languages and countries.

SET UP YOUR VOICE ASSISTANT

Before you begin, make sure your mobile device and the soundbar are connected to the same Wi-Fi network.

To set up your voice assistant, use the Bose Music app. You can access this option from the Settings menu.

NOTES: 

•When setting up your voice assistant, make sure you use the same audio service­ account that you used in the Bose Music app.

•If you have multiple Bose Music products in your household, for a seamless voice assistant experience, Bose recommends one person use their Bose Music account and voice assistant account to set up the voice assistant for all Bose Music products.

Voice AssisTANT

ACCESS GOOGLE ASSISTANT

Your soundbar with Google Assistant. You can easily enjoy music at home; you can play your favorite music, control volume, and find information about the song that you are listening to, hands-free. You can also plan your day, set alarms, and control smart devices around your home – just by using your voice. Just start by saying

“Hey Google” or tap the Action button b to start a conversation with Google Assistant.

For more information about what Google Assistant can do, visit: https://support.google.com/assistant

NOTES: 

•Google Assistant isn’t available in certain languages and countries.

•For more information about playing music with Google Assistant, see page 27.

Use your voice

Start with “Hey Google,” then say:

Voice AssisTANT

PLAY MUSIC WITH GOOGLE ASSISTANT

You can ask Google Assistant to play music from your default audio service or from a specific audio service.

Start with “Hey Google,” then say:

Choose a default audio service

During initial setup for Google Assistant, the Google Assistant app prompts you to select a default audio service. When using Google Assistant with Bose products,­ only Pandora and Spotify are supported default services. Although other audio services are listed as available­ during setup, they are not supported.

For the best experience, choose Pandora or Spotify as your default audio service. If you choose an unsupported audio service, you hear an error message when ­requesting to play music.

Voice AssisTANT

ACCESS AMAZON ALEXA

Alexa is the intelligent cloud-based voice service that you can talk to on your soundbar. All you have to do is ask Alexa to play music, hear the news, set a timer, control your smart home, and more. Alexa is also designed to protect your privacy – you can view and delete your voice requests at any time in the Alexa app.

For more information about what Alexa can do, visit: https://www.amazon.com/usealexa

NOTE: Alexa isn’t available in all languages and countries.

Use your voice

Start with “Alexa,” then say:

Voice AssisTANT

The Action button b and Microphone off button nare used to control Alexa. They are located on the top of the soundbar.

Microphone off button

Voice AssisTANT

CONTROL AUDIO WITH VOICE4VIDEO

Bose Voice4Video technology expands your Amazon Alexa voice capabilities like no other soundbar can. In addition to controlling your smart soundbar, you can control your TV and cable or satellite box with just your voice. With one simple ask of Alexa, you can turn on your TV and smart soundbar, tune to a station by network name or channel number, and start watching your favorite shows instantly. Say goodbye to missing remotes and remote tutorials, because Bose Voice4Video will make everyone feel like experts — even the babysitter or your tech-troubled in-laws.

Set up Voice4Video

To set up Voice4Video, use the Bose Music app.

NOTE: Before setting up Voice4Video, you must set up Alexa in the Bose Music app (see page 24).

Voice AssisTANT

Use your voice

Start with “Alexa,” then say:

*Only available for cable or satellite boxes.

BLUETOOTH CONNECTIONS

CONNECT A MOBILE DEVICE

1. On the remote, press the Bluetooth button l.

The light bar pulses blue.

2.On your mobile device, turn on the Bluetooth feature. NOTE: The Bluetooth menu is usually found in the Settings menu.

BLUETOOTH CONNECTIONS

3.Select your soundbar from the device list.

NOTE: Look for the name you entered for your soundbar in the ­Bose Music app. If you didn’t name your soundbar, the default name appears.

Bose Smart Soundbar 300

Once connected, you hear a tone, and the light bar glows solid white then fades to black. The soundbar’s name appears in the mobile device list.

DISCONNECT A MOBILE DEVICE

To disconnect your mobile device, use the Bose Music app.

TIP: You can also use Bluetooth settings on your mobile device. Disabling the Bluetooth­ feature disconnects all other devices­ .

RECONNECT A MOBILE DEVICE

On the remote, press the Bluetooth button l.

The soundbar tries to connect with the most recently-connected device.

NOTES: 

•Make sure the Bluetooth feature is enabled on your mobile device.

•The device must be within 30 ft (9 m) and powered on.

BLUETOOTH CONNECTIONS

CONNECT AN ADDITIONAL MOBILE DEVICE

You can store up to eight devices in the soundbar device list.

NOTE: You can play audio from only one device at a time.

1.On the remote, press and hold the Bluetooth button l until the light bar pulses blue.

2.On your mobile device, select your soundbar from the device list.

NOTE: Make sure the Bluetooth feature is enabled on your mobile device.

CLEAR THE SOUNDBAR DEVICE LIST

1.On the remote, press and hold l for 10 seconds until the light bar pulses white twice then fades to black.

The light bar pulses blue.

2.Delete the soundbar from the Bluetooth list on your device.

All devices are cleared, and the soundbar is ready to connect (see page 32).

STREAM AUDIO WITH AIRPLAY

The soundbar is capable of playing AirPlay 2 audio, which allows you to quickly stream audio from your Apple device to the soundbar or multiple speakers.

NOTES: 

•To use AirPlay 2, you need an Apple device running iOS 11.4 or later.

•Your Apple device and soundbar must be connected to the same Wi-Fi network.

•For more information about AirPlay, visit: https://www.apple.com/airplay

STREAM AUDIO FROM THE CONTROL CENTER

1.On your Apple device,A open the Control Center.

2.Tap and hold the audio card in the top-right corner of the screen, then tap the AirPlay icon .

3. Select your soundbar.

STRE M AUDIO FROM AN APP

SOUNDBAR STATUS

The LED light bar located on the front of the soundbar shows the soundbar status.

Light bar

NOTE: The light bar displays one status at a time of the selected source.

WI-FI STATUS

Shows the Wi-Fi connection status of the soundbar.

BLUETOOTH STATUS

Shows the Bluetooth connection status of mobile devices.

Microphone off light

Soundbar StaTUS

MEDIA PLAYBACK AND VOLUME STATUS

Shows the soundbar status when controlling media playback and volume.

UPDATE AND ERROR STATUS

Shows the status of software updates and error alerts.

ADVANCED FEATURES

DISABLE/ENABLE WI-FI CAPABILITY

On the remote, press and hold the Mute button A and Bluetooth button l until the light bar pulses white twice then fades to black.

CONNECT BOSE PRODUCTS

COMPATIBLE ACCESSORIES

You can connect any of these accessories to the soundbar. For more information, refer to your accessory owner’s guide.

•Bose Bass Module 700: worldwide.Bose.com/Support/BASS700

•Bose Bass Module 500: worldwide.Bose.com/Support/BASS500

•Acoustimass 300 bass module: global.Bose.com/Support/AM300

•Bose Surround Speakers 700: worldwide.Bose.com/Support/WSS700

•Bose Surround Speakers: worldwide.Bose.com/Support/WSS

•Virtually Invisible 300 wireless surround speakers:­ global.Bose.com/Support/VI300

CONNECT A BOSE SOUNDLINK BLUETOOTH SPEAKER OR BOSE NOISE CANCELLING HEADPHONES 700

With Bose SimpleSync technology, you can connect certain Bose SoundLink Bluetooth speakers or Bose Noise Cancelling Headphones 700 to the soundbar for a new way to hear your music and movies.

Benefits

•A personal TV listening experience: Listen to TV without disturbing others by ­connecting your Bose Noise Cancelling Headphones 700 to the soundbar. Use independent ­volume controls on each product to lower or mute the soundbar while keeping your ­headphones as loud as you like.

•Another room of audio: Listen to the same song in two different rooms at the same time by connecting your Bose SoundLink Bluetooth speaker to the soundbar.

NOTE: SimpleSync technology has a Bluetooth range of 30 ft (9 m). Walls and construction materials can affect reception.

Compatible products

You can connect most Bose SoundLink Bluetooth speakers to the soundbar, as well as Bose Noise Cancelling Headphones 700.

Popular compatible products include:

•Bose SoundLink Revolve+ Bluetooth speaker

•Bose SoundLink Mini Bluetooth speaker

•Bose SoundLink Color Bluetooth speaker

•Bose Noise Cancelling Headphones 700

New products are added periodically. For a complete­ list and more information, visit: worldwide.Bose.com/Support/Groups

Connect Bose ProductS

Connect using the Bose Music app

To connect your Bose SoundLink Bluetooth speaker or Bose Noise Cancelling Headphones 700 to the soundbar, use the Bose Music app. For more information, visit: worldwide.Bose.com/Support/Groups

NOTES: 

•Make sure that the product you’re connecting to is powered on, within 30 ft (9 m) of the soundbar, and ready to connect to another device. For more information, refer to your product owner’s guide.

•You can connect only one product at a time to the soundbar.

RECONNECT A BOSE SOUNDLINK BLUETOOTH SPEAKER OR BOSE NOISE CANCELLING HEADPHONES 700

Power on your Bose SoundLink Bluetooth speaker or Bose Noise Cancelling Headphones 700.

Your speaker or headphones try to connect to the most recently-connected ­Bluetooth device, including the soundbar.

NOTES: 

•The soundbar must be within range (30 ft or 9 m) and powered on.

•If your speaker doesn’t connect, see “Soundbar doesn’t reconnect to a ­previously-connected Bose SoundLink ­Bluetooth speaker” on page 52.

•If your headphones don’t connect, see “Soundbar doesn’t ­reconnect to ­previously-connected Bose Noise Cancelling Headphones 700” on page 52.

CARE AND MAINTENANCE

UPDATE THE SOUNDBAR

The soundbar updates automatically when connected to the Bose Music app and your Wi-Fi network.

REPLACE THE REMOTE BATTERY

1.Using a coin, turn the battery compartment cover left (counter-clockwise) and remove the cover.

Care and Maintenance

2. Insert the new battery flat side up, with the H symbol facing up.

NOTE: Use only an agency approved (e.g., UL) CR2032 or DL2032 3-volt lithium battery.

3. Reset the cover and turn it right (clockwise) to lock in place.

Care and Maintenance

CLEAN THE SOUNDBAR

Wipe the outside surfaces of the soundbar with a soft, dry cloth.

CAUTIONS:

•Do NOT allow liquids to spill onto the soundbar or into any openings.

•Do NOT blow air into the system.

•Do NOT use a vacuum to clean the system.

•Do NOT use any sprays near the system.

•Do NOT use any solvents, chemicals, or ­cleaning solutions containing alcohol, ammonia, or abrasives.

•Do NOT allow ­objects to drop into any openings.

REPLACEMENT PARTS AND ACCESSORIES

Replacement parts and accessories can be ordered through Bose customer service. Visit: worldwide.Bose.com/Support/SB300

LIMITED WARRANTY

The soundbar is covered by a limited warranty. Visit our website at global.Bose.com/warranty for details of the limited warranty.

To register your product, visit global.Bose.com/register for instructions. Failure to ­register will not affect your limited ­warranty rights.

TROUBLESHOOTING

TRY THESE SOLUTIONS FIRST

If you experience problems with the soundbar:

•Make sure the soundbar is connected to a live AC (mains) outlet.

•Secure all cables.

•Check the state of the soundbar (see page 35).

•Move the soundbar at least 1 – 3 ft (0.3 – 0.9 m) away from ­possible interference ­(wireless routers, cordless phones, televisions, microwaves, etc.).

•Move the soundbar within the recommended range of your wireless router or ­mobile device for proper operation.

•Place the soundbar according to the placement guidelines (see page 13).

OTHER SOLUTIONS

If you could not resolve your issue, see the table below to identify symptoms and solutions­ to common problems. If you are unable to resolve your issue, contact Bose customer service.

Visit: worldwide.Bose.com/contact

No HDMI ARC or optical port on your TV

Connect to your TV using an audio converter­ and separate audio­ cable,­ such as a coaxial, 3.5 mm, or analog­ audio cable (not provided). The type of converter and cable you need depends on the audio output ports available on your TV.

Soundbar doesn’t power on (light bar doesn’t pulse when powered on)

Remote is inconsistent or doesn’t work

Troubleshooting

If the left side of the light bar is glowing solid white, the soundbar is muted. Press the Mute button A to unmute the soundbar.

Make sure your mobile device isn’t muted.

Increase the volume on the soundbar (see page 21) or your mobile device.

Switch to a different source (see page 20).

Play audio from a different application or audio service. If the audio is from a Wi-Fi source, reset the router. Restart your mobile device.

Make sure you’re using a compatible Bluetooth mobile device.

Intermittent or no ­audio Make sure your HDMI cable is inserted into a port on your TV from soundbar labeled HDMI ARC (Audio Return Channel), not a standard

HDMI port. If your TV doesn’t have an HDMI ARC port, connect the soundbar using the optical cable (see page 56).

If the soundbar is connected to your TV HDMI ARC port, make sure that Consumer Electronics Control (CEC) is enabled in your TV system menu. Your TV may refer to CEC by a different name. Refer to your TV owner’s guide.

Disconnect your HDMI cable from your TV HDMI ARC port and reconnect it.

Insert the optical cable into a port­ on your TV labeled Output or OUT, not Input or IN.

Unplug the power cords for the soundbar and optional bass module or surround speakers, wait 30 seconds, and ­plug them firmly into a live AC (mains) outlet.

Soundbar doesn’t connect to bass module or surround speakers

Troubleshooting

No audio from bass module or surround speakers

Sound is coming­ from TV speaker

Test different sources if available.

Make sure that your TV can ­output surround sound audio. Refer to your TV owner’s guide.

Poor or distorted­ audio

If the audio is being played from another device, reduce the volume of that device.

Adjust the bass level using the Bose Music app (see page 22).

Power off your TV speakers. Refer to your TV owner’s guide.

If the soundbar is wall mounted, adjust the audio (see page 14).

Soundbar doesn’t play audio from the correct source or selects the incorrect source after a delay

Troubleshooting

Soundbar doesn’t connect­ to Wi-Fi network

Soundbar doesn’t connect to mobile device

Bose Music app doesn’t work on mobile device

Soundbar isn’t visible to add to another­ Bose account

Troubleshooting

Your Google Assistant doesn’t respond