5 Proven Ways To Inflate Sleep Number Bed Without Remote (2023) (2024)

Sleep number bed has an air chamber just like air mattresses and we need to inflate sleep number bed before we sleep on it.

But sometimes you can’t find your remote or the remote can be faulty but don’t worry because you can still inflate sleep number bed without remote.

There are lots of proven and tested ways to inflate sleep number bed without a remote.

One of the fastest ways to inflate a sleep number bed without a remote is using the SleepIQ App on your phone but how to use SleepIQ App to inflate a sleep number bed?

And what are other ways to inflate the sleep number mattresses without using a remote?

Don’t worry we got you covered.

Just stay tuned.

How to Inflate Sleep Number Bed Without Remote (5 Different Ways)

As I said Before If you lost the sleep number bed’s remote or have a defective remote then you can still inflate and enjoy sleeping on the sleep number bed.

Here are some proven and tested ways to inflate sleep number bed without using the remote.

Way 1: Use SleepIQ App

SleepIQ App is available on both android and apple app stores.

This app is free so you don’t need to pay any membership fees or anything.

Step 1: Install SleepIQ App

Find the SleepIQ app in your app market and install the app.

And once you install the app, connect your wifi and turn on your Bluetooth.

Step 2: Login and set up the settings

Once you downloaded and connected your wifi and turned on Bluetooth then log in.

Once you logged in, click on the right side of the app where it says “remote”.

Now pair the bed by selecting the bed from the list generated through scans.

If you get into trouble while connecting your bed then you can find the bed number on the base of the pump unit.

Still, nothing happens, then make sure the pump is plugged in and this step is important because the app connects to the pump.

And once the app connects to the bed the bed will inflate in 20 minutes.

Also Read: How Long Do Sleep Number Beds Last?

Way 2: Manual Method

Lots of people think the manual method is a very mechanical and complicated task but it isn’t.

This method is so simple and anyone can inflate sleep number bed with a manual method.

For this method, you can use a low-pressure electronic pump or contact the sleep number’s tech support team.

The first way is simple, just buy a low-pressure electronic pump & adaptor that will fit into the bed.

If you can’t find the right size of adaptor then use duct tape to seal and prevent air from coming out of the bed.

Disconnects the bed from the electricity supply which means unplugging the bed from the electricity supply.

Now connect the low-pressure pump and seal the area and start inflating the sleep number bed using the manual pump.

Wait for 15 to 20 minutes until it fully inflates and now remove the low-pressure pump and reconnect the plug.

Way 3: Fix Your Remote

If you haven’t lost the remote, but if your remote is not working then you can fix your remote with simple and easy steps.

Here is an article about every error and troubleshooting you face when the remote is not working.

https://support.sleepnumber.com/hc/en-us/articles/1500002824002-Troubleshooting-E1-Connectivity-Error-Sleep-Number-Mattress

And you can see their troubleshooting guide to find out the useful solution for your problem.

Click here for a troubleshooting guide.

Way 4: Replace Your Remote

Before you order a replacement remote for your sleep number bed, make sure the problem is only in the remote.

Because if the remote is not the problem then you can waste your time and money.

Just go to the sleep number’s official site, and if your remote is under warranty then contact the support team and get your replacement remote.

Way 5: contact the support team

Before buying a new remote for your sleep number bed you should contact the support team to tell them your problem.

Because sometimes the problem is not in the remote.

And you should do this step before doing a manual pump or fixing your remote.

The support team will provide all solutions and support to repair the remote or the mattress.

How Do You Pump Up A Sleep Number Bed Without WIFI?

You don’t need a wifi if you want to inflate the sleep number bed through the remote.

You will only need wifi when you don’t have a remote and want to use SleepIQ App to inflate your sleep number bed.

If you have a remote then press and hold the “fill” button and you can fill the air chambers of the sleep number bed from 1 to 100.

Why Isn’t My Sleep Number Remote Working?

If your remote is defective then you should contact the sleep number’s customer support team and tell them your problem.

But if your remote suddenly stopped working then there may be two reasons why this is happening.

• Broken power connection
• Bent pipe

These can be two reasons why your remote is not working.

And when you notice that the firmness control system is not working when you try to inflate or deflate your sleep number bed then you can tell that the firmness control system isn’t receiving the power. Or the pipe inside the control system is vented.

In those situations, always contact the support team for help.

How To Reset Sleep Number Bed Without Remote

For resetting the sleep number bed, remove the inlet hose and place the cap which is supplied with the bed to prevent air from escaping.

Now hold down both toggle switches simultaneously for ten seconds and the unit will reset.

Once it’s done replace the hose and you are ready to go.

Why is my Sleep Number bed not inflating?

If your sleep number bed is not inflating then you need to find the cause of the problem because either your remote is not working or the problem is with your sleep number bed.

So you need to find and troubleshoot to fix your problem, contact the support team of sleep number bed for resolving your issues.

How do I get my Sleep Number bed to inflate?

You can inflate your sleep number bed using a remote or a SleepIQ App.

If you are using a remote then just press and hold the “fill” button to inflate your mattress.

And if you are using the app then you need to connect your app to the sleep number’s pump and the inflation process will start automatically.

Final Words

Inflating the sleep number bed is not a hard task because anyone can inflate sleep number bed with simple and easy steps.

You can inflate the sleep number bed by using a manual pump, remote, or using SleepIQ App.

But if you need to get your replacement remote if you lost the remote or you have a defective remote.

If you have any questions regarding inflating the sleep number bed without a remote then you can ask them in the comment section of this article.